Forside
Home | Language |
Kontakt | Fiber Links | Sitemap | Suchen 
Suchen







Introduction and Concluding remarks

 

Introduction

 

Environmental consideration to the choice of construction materials is an issue of growing importance in engineering. In the Netherlands, as in several other countries, the government responds to this issue by promoting materials and technologies which reduce environmental impact of both, public and private projects. However, an assessment of this environmental impact is quite complex, especially with regard to complex construction projects. The existing analytical methods, like LCA (lifecycle analysis, require an extensive data input. These data are usually not known at the stage of material selection.


The following article presents a bridge construction project, in which the building material has been selected using a relatively simple ecological analysis. The number of required data was kept small; and the results were reduced to a very few comparable figures for the considered material options. The most advantageous solution was found in a bridge of pultruded, FGRP (fiberglass reinforced polymers) sections.

 

 

Materialwahl für eine Brücke unter Berücksichtigung des Umweltschutzes. Ökologische Überlegungen bei der Auswahl von Baumaterialien sind in der Bautechnik von zunehmender Wichtigkeit. In den Niederlanden, wie in manchen anderen Länder, fördert die Regierung den Einsatz von Materialen und Technologien bei öffentlichen und privaten Projekten, die eine Belastung der Umwelt reduzieren. Die Beurteilung dieser Umweltbelastung ist jedoch für komplexe Bauvorhaben ziemlich kompliziert, denn die vorhandenen Analytik-Methoden, wie die Produkt-Ökobilanz (life cycle analysis – LCA) haben einen hohen Bedarf an Ausgangsdaten, die in der Phase der Materialauswahl gewöhnlich noch nicht bekannt sind.

Der vorliegende Beitrag beschreibt ein Brückenprojekt, bei dem der Baustoff im Ergebnis einer relativ einfachen Ökobilanz ausgewählt worden ist. Die benötigte Datenmenge war klein. Die Ergebnisse konnten auf ganz wenige Vergleichsgrößen für die zu beurteilenden Materialvarianten reduziert werden. Als vorteilhafteste Lösung erwies sich eine Brücke aus pultrudierten glasfaserverstärkten Kunststoffprofilen (GFK)-Profilen.

 

Concluding remarks

 

The environmental analysis applied in this project has been first presented in the Netherlands and in Belgium (20); and later to the international audience of pultrusion specialists (21), (22). It met interest of many professionals; and it caused diverse discussions, which proves that the idea of pro-ecological, socalled „sustainable“ projects has broad support of the construction market.

 

Continuing these discussions is more important than the results of the study presented here. Every construction project is peculiar. Material which offers the best environmental solution in one project, does not necessarily do it in the other. The intention of this article was to present a way in which all these peculiarities can be investigated and quantified in terms of environmental impact – rather than to promote a specific material. The call for thorough environmental consideration to the construction projects is becoming louder. The purpose of this presentation was to contribute to answering this call.

 

References

  1. Dutch standard NEN 6788: The design of steel bridges - Basic requirements and simple rules. Netherlands Normalisatire-instituut, December 1995.
  2. Schimmelpfeng, L., Lück, P.: Ökologische Produktgestaltung. Stoffstromanalysen und Ökobilanzen… Springer-Verlag, Berlin Heidelberg, 1999.
  3. Sietz, M.: Umweltschutz, Produktqualität und Unternehmens-erfolg. Von Öko-Audit zur Ökobilanz. Springer-Verlag, Berlin Heidelberg 1998.
  4. Braestrup, M.W.: Footbridges Constructed from Glass-Fibre-Reinforced Profiles, Denmark. Structural Engineering International, 4 (1999), p.256-258.
  5. Meier, U.: Composites Materials in Bridge Repair. Applied Composite Materials, 7 (2000), p. 75-94.
  6. Strongwell Corp.: Extern DWBTM Planned for Infrastructure. Strongwell News, web address www.Derakane.com
  7. Seible, F., Karbhari, V.M., Burgueño, R.: Kings Stormwater Channel and I-5/Gilman Bridges USA. Structural Engineering International, 4 (1999), p.250-253.
  8. Reynolds Metals Company: AlumadeckTM  Bridge System, the Technical guide on aluminum bridge decks. Reynolds, Richmond (VA), 1997.
  9. Klinge, R.: Protection of Norwegian Steel Bridges against Corrosion. Stahlbau 68 (1999), p.382-391.
  10. Noordzij, R.: Toepassing van vezelversterkte kunststof puntdeuren voor de Spieringsluis. Constructeur, 4 (2001), p.32-35.
  11. Daniel, R.A., Brekoo, A.M.J.L., Mulder, A.J.: Innovatie met respect voor oude kennis – Nieuwe materialen voor oude sluis. Land + Water, 11 (2001), p.36-38.
  12. Elferink, H.: Exergie-analyse ook nuttig voor verbetering van Producten. Energie – en Milieuspectrum, 11 (1998), p.22-25.
  13. Pré Consultants: Milieuvergelijking van remmingswerk, report on the research project 2092. Amersfoort, August 1994.
  14. Intron Institute: Éen energianalyse vanvarianten voor aanpassing van de RW 16/13, report no. M715240/R980548, Houten, November 1998.
  15. Mahadvi, A., Ries, R.: Towards Computational ecoanalysis of building designs. Computers & Structures 67 (1998), p.375-387.
  16. Etterlin G., Hursch, P., Topf, M.: Ökobilanz. Ein Leitfaden Für die Praxis. B. I. Wissenschaftsverlag, Mannheim 1992.
  17. Sitting, M.: World-wide Limits for Toxic and Hazardous Chemicals in Air, Water and Soil. Noyes Publications, Park Ridge, New Jersey, 1994.
  18. Unpublished information from eng. I Kraeger, research Chemist, DSM Composites Resins, Zwolle, June 2001.
  19. Unpublished information from eng. H. Engelen, Dow Automotive, TS&D Composites, Rheinmüster, May 2002.
  20. Daniel, R.A., Nagtegaal, G., Van Houwelingen, R.T.A.: Kunststofbrug voor voetgangers en milieu. Land + Water, 9 (2001), p.42-44.
  21. Daniel, R. A., Nagtegaal, G.: Pedestrian bridge of pultruded Sections as result of ecological design. Proceedings of the EPTA Seminar. Roermond, October 2001.
  22. Daniel, R.A.: A bridge of pultruded sections – for pedestrians and the environment. Proceedings of the 6th  World Pultrusion Conference. EPTA, Prague, April 2002.

 

In MyFiberLinks aufnehmen
Print

Profile für Fenster, Türen und Fassaden

Profile aus faserverstärkten Kunststoffen isolieren effektiv gegen Wärme und Kälte. Die Profile kombinieren eine Reihe von Eigenschaften, die im thermischen Zusammenhang interessant sind.

Profile für Fenster, Türen und Fassaden

Profile für Tragwerke

Verbundkunststoffe wie GFK sind fortschrittliche Alternativen zu herkömmlichen Materialien wie Holz, Beton oder Stahl.

Profile für Tragwerke

Profile für Windenergie

Fiberline Composites zählt zu den weltweit führenden Herstellern von FVK-Profilen für die Windkraftbranche. Wir entwickeln innovative Hightech-Lösungen in enger Zusammenarbeit mit Kunden und Forschungseinrichtungen in aller Welt.

Profile für Windenergie